linux终端设备：tty子系统相关的初始化

  linux类系统相较于windos类系统用“魔幻”也不为过，神奇的控制台终端如ctrl+alt+F1至F6、UI桌面打开终端、远程ssh登录等等，在神奇的命令行协助下总能随时随地完成手中的工作。
  当然，这些功能虽不算复杂，但庞大的架构及繁多的代码让人有一种深不测的感觉。经过一段时间对终端相关代码的分析对它们有了初步的了解。它们采用较为一致的思路方式实现，代码难度也不算太高，具备字符驱动相关的知识加上足够的耐心便可以解开这个“庞然大物”。
  linux终端子系统主要围绕着外设(输入设备)到内核的输入事件处理及转发，到达我们目前看到的效果。
  大致思路为：外设 -> input事件子系统 -> tty子系统 -> 输出/输入对应的终端种类，如console、pty等。
  终端类型可以分为：tty子系统、tty设备、console设备、pty(伪终端)设备等等，在pty这一层又做了不同的处理对应/dev/pts/ptmx->/dev/ptmx->/dev/pts/*等等，由于这部分内容过于繁多，这里先简单描述一小部分执行逻辑，之后应该还会有相关文章继续向后扩展内容。

目录

1. tty

1.1 tty_class_init

1.2 tty子系统注册

2. console

2.1 console注册

2.2 con_init

3. 源码结构

4. 部分结构定义

5. 扩展函数/变量

1. tty

1.1 tty_class_init

  tty子系统首先创建tty class，绑定设备号(动态生成)，由class对象tty_class关联/dev/目录下的tty相关访问文件，如/dev/tty0、/dev/tty1

  通常情况下，驱动通过class名称与其建立关系，如pci_driver的.name字段指定class名称

static int __init tty_class_init(void) {tty_class = class_create(THIS_MODULE, "tty"); // 创建tty class指向__this_module(模块所有者) || \/ —————————————————————————————————————————————————————————————————————— define class_create(owner, name) \ ({ \static struct lock_class_key __key; \__class_create(owner, name, &__key); \ })#ifdef MODULE extern struct module __this_module; #define THIS_MODULE (&__this_module) #else #define THIS_MODULE ((struct module *)0) #endif ——————————————————————————————————————————————————————————————————————if (IS_ERR(tty_class))return PTR_ERR(tty_class);tty_class->devnode = tty_devnode; // 设备号return 0; }postcore_initcall(tty_class_init);|| \/ ic char *tty_devnode(struct device *dev, umode_t *mode) {if (!mode)return NULL;if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||dev->devt == MKDEV(TTYAUX_MAJOR, 2))*mode = 0666;return NULL; }

class

1.2 tty子系统注册

  tty子系统通过tty_init函数完成注册过程，它在字符设备初始化函数chr_dev_init中调用，tty子系统实际上也属于字符设备

  tty子系统通过tty_fops结构中的函数完成应用层的访问，如应用程序调用open(“/dev/tty”…)函数

tty_sysctl_init(); // 注册tty子系统标签(配置参数) || \/ register_sysctl_table(tty_root_table);

tty_root_table

cdev_init(&tty_cdev, &tty_fops); // 初始化tty_cdev设备，关联tty_fops结构if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) // 注册tty_cdev设备panic("Couldn't register /dev/tty driver\n");device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); // 创建tty_cdev设备，指向tty_class，通过open等函数访问/dev/tty ...return 0; } fs_initcall(chr_dev_init);

tty_fops

2. console

2.1 console注册

  console紧跟着 tty子系统之后注册，它具有自己的操作结构console_fops，它在内核中的形式与tty子系统相似，基于tty_class创建consdev设备
  vty_init函数注册vc0_cdev设备(/dev/tty0)，通过创建vcs、vcsu、vcsa相关设备，完成向虚拟图形界面的数据输出等工作。vty_init函数末尾可以看到键盘驱动注册函数(通常情况下，不同的按键厂商还是会做自己的驱动，至少在设备ID、厂商ID这部分是这样)。

cdev_init(&console_cdev, &console_fops); // 初始化console_cdev设备，关联console_fops结构if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) // 注册console_cdev设备panic("Couldn't register /dev/console driver\n");

console_fops

consdev = device_create_with_groups(tty_class, NULL,MKDEV(TTYAUX_MAJOR, 1), NULL,cons_dev_groups, "console"); // 创建consdev设备，指向tty_class，通过open等函数访问/dev/console if (IS_ERR(consdev))consdev = NULL;

cons_dev_groups

#ifdef CONFIG_VTvty_init(&console_fops); #endifreturn 0; } || \/ int __init vty_init(const struct file_operations *console_fops) {cdev_init(&vc0_cdev, console_fops); // 初始化vc0_cdev设备，关联console_fops结构if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) // 注册vc0_cdev设备panic("Couldn't register /dev/tty0 driver\n");tty0dev = device_create_with_groups(tty_class, NULL,MKDEV(TTY_MAJOR, 0), NULL,vt_dev_groups, "tty0");//注册tty0dev设备，指向tty_class，通过open等函数访问/dev/tty0 if (IS_ERR(tty0dev))tty0dev = NULL;vcs_init(); // 注册、创建vcs、vcsu、vcsa设备

vcs_init

console_driver = tty_alloc_driver(MAX_NR_CONSOLES, TTY_DRIVER_REAL_RAW |TTY_DRIVER_RESET_TERMIOS); // 分配cosole驱动if (IS_ERR(console_driver))panic("Couldn't allocate console driver\n");console_driver->name = "tty"; console_driver->name_base = 1;console_driver->major = TTY_MAJOR;console_driver->minor_start = 1;console_driver->type = TTY_DRIVER_TYPE_CONSOLE;console_driver->init_termios = tty_std_termios;

tty_alloc_driver

if (default_utf8)console_driver->init_termios.c_iflag |= IUTF8;tty_set_operations(console_driver, &con_ops); // console_driver关联con_ops结构if (tty_register_driver(console_driver)) // 注册tty设备，指定tty_class，这里包括tty的多个种类，如console、ptypanic("Couldn't register console driver\n");kbd_init(); // 注册键盘驱动console_map_init(); // 设置默认unicode映射 #ifdef CONFIG_MDA_CONSOLEmda_console_init(); #endifreturn 0; }

con_ops
tty_register_driver
kbd_init

2.2 con_init

  虚拟控制台相关的初始化，如控制台的回调、控制台的屏幕设置、vc_SAK组合按键监控触发的事件、虚拟屏幕缓存分配等等，最后注册到通知链，表示控制台已分配完成

static int __init con_init(void) {const char *display_desc = NULL;struct vc_data *vc;unsigned int currcons = 0, i;console_lock();if (!conswitchp)conswitchp = &dummy_con; // 虚拟控制台的控制台“开关”结构 (consw-控制台的回调)display_desc = conswitchp->con_startup(); // "dummy device"if (!display_desc) { fg_console = 0;console_unlock();return 0;}

dummy_con

for (i = 0; i < MAX_NR_CON_DRIVER; i++) {struct con_driver *con_driver = &registered_con_driver[i];if (con_driver->con == NULL) { // 虚拟控制台赋值con_driver->con = conswitchp;con_driver->desc = display_desc; // "dummy device"con_driver->flag = CON_DRIVER_FLAG_INIT;con_driver->first = 0;con_driver->last = MAX_NR_CONSOLES - 1;break;}}for (i = 0; i < MAX_NR_CONSOLES; i++)con_driver_map[i] = conswitchp;if (blankinterval) {blank_state = blank_normal_wait;mod_timer(&console_timer, jiffies + (blankinterval * HZ)); // 虚拟控制台(屏幕，ctl+alt+F2...F6这种屏幕，而ctl+alt+F1属于控制台启动的类Xwindow这种模拟画面)刷新时间}for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); // 虚拟控制台分配INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); // 初始化工作队列，vc_SAK属于组合按键监控触发的事件，如alt+k+Prtscreentty_port_init(&vc->port); // 初始化tty端口及tty_bufhead等结构，用于翻转缓冲区刷新到线路规程visual_init(vc, currcons, 1); // 初始化虚拟控制台的一些参数/* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); // 虚拟屏幕缓存分配vc_init(vc, vc->vc_rows, vc->vc_cols,currcons || !vc->vc_sw->con_save_screen); // 虚拟控制台屏幕的模式、范围、颜色等设置}

tty_port_init
visual_init
vc_init

vcs_make_sysfs(currcons); // 创建当前的vcs*、vcsu*、vcsa*设备...atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, &param); // 注册到通知链，表示控制台已分配return 0; err_free:visual_deinit(vc);kfree(vc);vc_cons[currcons].d = NULL;return err; }

3. 源码结构

  tty子系统标签

tatic struct ctl_table tty_root_table[] = {{.procname = "dev",.mode = 0555,.child = tty_dir_table, // 子级标签}, { } };

  tty子系统子级标签

static struct ctl_table tty_dir_table[] = {{.procname = "tty",.mode = 0555,.child = tty_table, // 子级标签}, { } };

  tty子系统子级标签 ，通过/proc/sys/dev/tty/ldisc_autoload来传递数字

static struct ctl_table tty_table[] = {{.procname = "ldisc_autoload",.data = &tty_ldisc_autoload,.maxlen = sizeof(tty_ldisc_autoload),.mode = 0644,.proc_handler = proc_dointvec,.extra1 = SYSCTL_ZERO,.extra2 = SYSCTL_ONE,},{ } };

  tty_fops 文件操作接口

static const struct file_operations tty_fops = {.llseek = no_llseek,.read_iter = tty_read,.write_iter = tty_write,.splice_read = generic_file_splice_read,.splice_write = iter_file_splice_write,.poll = tty_poll,.unlocked_ioctl = tty_ioctl,.compat_ioctl = tty_compat_ioctl,.open = tty_open,.release = tty_release,.fasync = tty_fasync,.show_fdinfo = tty_show_fdinfo, };

  console_fops 文件操作接口

static const struct file_operations console_fops = {.llseek = no_llseek,.read_iter = tty_read,.write_iter = redirected_tty_write,.splice_read = generic_file_splice_read,.splice_write = iter_file_splice_write,.poll = tty_poll,.unlocked_ioctl = tty_ioctl,.compat_ioctl = tty_compat_ioctl,.open = tty_open,.release = tty_release,.fasync = tty_fasync, };

  vcs_fops 文件操作接口

static const struct file_operations vcs_fops = {.llseek = vcs_lseek,.read = vcs_read,.write = vcs_write,.poll = vcs_poll,.fasync = vcs_fasync,.open = vcs_open,.release = vcs_release, };

  con_ops 文件操作接口

static const struct tty_operations con_ops = {.install = con_install,.open = con_open,.close = con_close,.write = con_write,.write_room = con_write_room,.put_char = con_put_char,.flush_chars = con_flush_chars,.ioctl = vt_ioctl, #ifdef CONFIG_COMPAT.compat_ioctl = vt_compat_ioctl, #endif.stop = con_stop,.start = con_start,.throttle = con_throttle,.unthrottle = con_unthrottle,.resize = vt_resize,.shutdown = con_shutdown,.cleanup = con_cleanup, };

  dummy_con 虚拟控制台的控制台“开关”结构

const struct consw dummy_con = {.owner = THIS_MODULE,.con_startup = dummycon_startup,.con_init = dummycon_init,.con_deinit = dummycon_deinit,.con_clear = dummycon_clear,.con_putc = dummycon_putc,.con_putcs = dummycon_putcs,.con_cursor = dummycon_cursor,.con_scroll = dummycon_scroll,.con_switch = dummycon_switch,.con_blank = dummycon_blank, }; EXPORT_SYMBOL_GPL(dummy_con);

  tty_port_default_client_ops

const struct tty_port_client_operations tty_port_default_client_ops = {.receive_buf = tty_port_default_receive_buf,.lookahead_buf = tty_port_default_lookahead_buf,.write_wakeup = tty_port_default_wakeup, }; EXPORT_SYMBOL_GPL(tty_port_default_client_ops);

4. 部分结构定义

  struct class

* struct class——设备类* @name:类名。* @owner:模块所有者。* @class_groups:该类的默认属性。* @dev_groups:属于该类的设备的默认属性。* @dev_kobj:表示这个类并将其链接到层次结构中的kobject。* @dev_uevent:当设备被添加或从该类中移除时调用*很少其他东西生成uevent来添加环境*变量。* @devnode:回调提供devtmpfs。* @class_release:调用来释放这个类。* @dev_release:被调用释放设备。* @shutdown_pre:在驱动程序关闭前的关闭时间调用。* @ns_type:回调使sysfs可以确定名称空间。* @namespace:设备的命名空间属于该类。* @get_ownership:允许类指定sysfs目录的uid/gid*表示属于该类的设备。通常与*设备的名称空间。* @pm:该类的默认设备电源管理操作。* @p:驱动核心的私有数据，不是别人*驱动核心可以触摸这个。＊*类是设备的高级视图，它抽象出了底层*实现细节。驱动程序可能看到的是SCSI磁盘或ATA磁盘，但是，*在类级别，它们都是简单的磁盘。类允许用户空间*根据设备的功能，而不是它们的性能来使用它们*连接或他们如何工作。struct class {const char *name;struct module *owner;const struct attribute_group **class_groups;const struct attribute_group **dev_groups;struct kobject *dev_kobj;int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);char *(*devnode)(struct device *dev, umode_t *mode);void (*class_release)(struct class *class);void (*dev_release)(struct device *dev);int (*shutdown_pre)(struct device *dev);const struct kobj_ns_type_operations *ns_type;const void *(*namespace)(struct device *dev);void (*get_ownership)(struct device *dev, kuid_t *uid, kgid_t *gid);const struct dev_pm_ops *pm;struct subsys_private *p; };

5. 扩展函数/变量

  cons_dev_groups 经过转换为 attribute_group结构的静态对象

ATTRIBUTE_GROUPS(cons_dev); || \/ #define ATTRIBUTE_GROUPS(_name) \ static const struct attribute_group _name##_group = { \.attrs = _name##_attrs, \ }; \ __ATTRIBUTE_GROUPS(_name) || \/ define __ATTRIBUTE_GROUPS(_name) \ static const struct attribute_group *_name##_groups[] = { \&_name##_group, \NULL, \ }转换成结构定义为： static const struct attribute_group cons_dev_group = { .attrs = cons_dev_attrs, }; static const struct attribute_group *cons_dev_groups[] = { &cons_dev_group, NULL, }

  vcs_init 注册、创建vcs、vcsu、vcsa设备

int __init vcs_init(void) { unsigned int i;if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))panic("unable to get major %d for vcs device", VCS_MAJOR); // 注册vcs设备，关联vcs_fopsvc_class = class_create(THIS_MODULE, "vc"); // 创建vc class，指向__this_module(模块所有者)device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); // 创建vcs设备，指向vc_class...device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 64), NULL, "vcsu"); // 创建vcsu设备...device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); // 创建vcsa设备...for (i = 0; i < MIN_NR_CONSOLES; i++)// define MIN_NR_CONSOLES 1vcs_make_sysfs(i); // 创建多个vcs*、vcsu*、vcsa*设备...return 0; } || \/ void vcs_make_sysfs(int index) {device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL,"vcs%u", index + 1);device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 65), NULL,"vcsu%u", index + 1);device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL,"vcsa%u", index + 1); }

vcs_fops

  tty_alloc_driver 分配tty驱动

struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,unsigned long flags) {struct tty_driver *driver;unsigned int cdevs = 1;int err;if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))return ERR_PTR(-EINVAL);driver = kzalloc(sizeof(*driver), GFP_KERNEL);if (!driver)return ERR_PTR(-ENOMEM);kref_init(&driver->kref);driver->num = lines;driver->owner = owner;driver->flags = flags;/* TTY_DRIVER_DEVPTS_MEM 0x0010** 不要使用标准的数组(&tty_driver.ttys和&tty_driver.termios)* 而是使用通过devpts文件系统输入的动态内存* 这只适用于PTY驱动程序**/if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {driver->ttys = kcalloc(lines, sizeof(*driver->ttys),GFP_KERNEL);driver->termios = kcalloc(lines, sizeof(*driver->termios),GFP_KERNEL);if (!driver->ttys || !driver->termios) {err = -ENOMEM;goto err_free_all;}}/* TTY_DRIVER_DYNAMIC_ALLOC 0x0040** 不要为驱动程序(&tty_driver.ports)分配每行需要的结构* 因为这会浪费内存* 这只适用于PTY驱动程序**/if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {driver->ports = kcalloc(lines, sizeof(*driver->ports),GFP_KERNEL);if (!driver->ports) {err = -ENOMEM;goto err_free_all;}cdevs = lines;}driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);if (!driver->cdevs) {err = -ENOMEM;goto err_free_all;}return driver;... }EXPORT_SYMBOL(__tty_alloc_driver);

  tty_register_driver

int tty_register_driver(struct tty_driver *driver) {int error;int i;dev_t dev;struct device *d;if (!driver->major) {error = alloc_chrdev_region(&dev, driver->minor_start,driver->num, driver->name);// 分配设备号if (!error) {driver->major = MAJOR(dev);driver->minor_start = MINOR(dev);}} else {dev = MKDEV(driver->major, driver->minor_start);error = register_chrdev_region(dev, driver->num, driver->name);// 注册设备号}if (error < 0)goto err;if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {error = tty_cdev_add(driver, dev, 0, driver->num); // 分配、注册驱动并且关联tty_fopsif (error)goto err_unreg_char;}

tty_cdev_add

mutex_lock(&tty_mutex);list_add(&driver->tty_drivers, &tty_drivers); // 驱动加入tty链表mutex_unlock(&tty_mutex);if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {for (i = 0; i < driver->num; i++) {d = tty_register_device(driver, i, NULL);if (IS_ERR(d)) {error = PTR_ERR(d);goto err_unreg_devs;}}}

tty_register_device

proc_tty_register_driver(driver);driver->flags |= TTY_DRIVER_INSTALLED;return 0;

  tty_cdev_add

static int tty_cdev_add(struct tty_driver *driver, dev_t dev,unsigned int index, unsigned int count) {int err;/* init here, since reused cdevs cause crashes */driver->cdevs[index] = cdev_alloc(); // 分配字符设备结构if (!driver->cdevs[index])return -ENOMEM;driver->cdevs[index]->ops = &tty_fops; // 为驱动关联tty_fops结构driver->cdevs[index]->owner = driver->owner;err = cdev_add(driver->cdevs[index], dev, count); // 注册字符设备if (err)kobject_put(&driver->cdevs[index]->kobj);return err; }

  tty_register_device 注册tty设备，指定tty_class，这里包括tty的多个种类，如console、pty

vice *tty_register_device(struct tty_driver *driver, unsigned index,struct device *device) {return tty_register_device_attr(driver, index, device, NULL, NULL); } || \/ struct device *tty_register_device_attr(struct tty_driver *driver,unsigned index, struct device *device,void *drvdata,const struct attribute_group **attr_grp) {char name[64];dev_t devt = MKDEV(driver->major, driver->minor_start) + index;struct ktermios *tp;struct device *dev;int retval;if (index >= driver->num) {pr_err("%s: Attempt to register invalid tty line number (%d)\n",driver->name, index);return ERR_PTR(-EINVAL);}/* tty设备类型* #define TTY_DRIVER_TYPE_SYSTEM 0x0001 内部使用* #define TTY_DRIVER_TYPE_CONSOLE 0x0002 控制台* #define TTY_DRIVER_TYPE_SERIAL 0x0003 串口* #define TTY_DRIVER_TYPE_PTY 0x0004 PTY(伪终端)* #define TTY_DRIVER_TYPE_SCC 0x0005 /* scc driver */* #define TTY_DRIVER_TYPE_SYSCONS 0x0006 内部使用*/if (driver->type == TTY_DRIVER_TYPE_PTY)pty_line_name(driver, index, name); // pty通用名称，PTY_TYPE_SLAVE类型指定为"tty"，其他类型为nameelsetty_line_name(driver, index, name); // 包含TTY_DRIVER_UNNUMBERED_NODE类型创建名称如"/dev/ttyprintk"，否则如"/dev/ttyprintk0..."dev = kzalloc(sizeof(*dev), GFP_KERNEL);if (!dev)return ERR_PTR(-ENOMEM);dev->devt = devt;dev->class = tty_class; // 设置指定tty_classdev->parent = device;dev->release = tty_device_create_release;dev_set_name(dev, "%s", name);dev->groups = attr_grp;dev_set_drvdata(dev, drvdata);dev_set_uevent_suppress(dev, 1); // dev->kobj.uevent_suppress=1retval = device_register(dev); // 注册设备... }

  kbd_init 注册键盘驱动

int __init kbd_init(void) {int i;int error;for (i = 0; i < MAX_NR_CONSOLES; i++) {kbd_table[i].ledflagstate = kbd_defleds(); // &0x20 ? 数字锁定模式kbd_table[i].default_ledflagstate = kbd_defleds();kbd_table[i].ledmode = LED_SHOW_FLAGS; // 传统模式kbd_table[i].lockstate = KBD_DEFLOCK;kbd_table[i].slockstate = 0;kbd_table[i].modeflags = KBD_DEFMODE; // 键盘重复 | 0-meta，1-meta=带ESC的前缀kbd_table[i].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; // Unicode模式}kbd_init_leds(); // LED触发接口error = input_register_handler(&kbd_handler); // 注册新的输入处理程序if (error)return error;tasklet_enable(&keyboard_tasklet); // 用于减小结构体tasklet_struct中字段count的值，等于0时重新相应软中断重新使能tasklet_schedule(&keyboard_tasklet); // 等待获得CPU资源并被调度执行return 0; }

  tty_port_init 初始化tty端口及tty_bufhead等结构，用于翻转缓冲区刷新到线路规程

void tty_port_init(struct tty_port *port) { memset(port, 0, sizeof(*port));tty_buffer_init(port); // 初始化tty_bufhead结构，初始化工作队列，用于flush_to_ldisc函数 (翻转缓冲区刷新到线路规程)init_waitqueue_head(&port->open_wait);init_waitqueue_head(&port->delta_msr_wait);mutex_init(&port->mutex);mutex_init(&port->buf_mutex);spin_lock_init(&port->lock);port->close_delay = (50 * HZ) / 100;port->closing_wait = (3000 * HZ) / 100;port->client_ops = &tty_port_default_client_ops;kref_init(&port->kref); } EXPORT_SYMBOL(tty_port_init);

tty_port_default_client_ops

  visual_init 初始化虚拟控制台的一些参数

static void visual_init(struct vc_data *vc, int num, int init) {/* ++Geert: vc->vc_sw->con_init determines console size */if (vc->vc_sw)module_put(vc->vc_sw->owner);vc->vc_sw = conswitchp; // 虚拟控制台的控制台“开关”结构 #ifndef VT_SINGLE_DRIVERif (con_driver_map[num])vc->vc_sw = con_driver_map[num]; // consw-控制台的回调 #endif__module_get(vc->vc_sw->owner);vc->vc_num = num; // 控制台编号/* 对于每个现有的显示器，* 我们都有一个指向该显示器上当前可见的控制台的指针，* 允许适当刷新fg_console以外的控制台。* 除非低级驱动程序提供自己的display_fg变量，* 否则我们将此变量用于“主显示”。* /vc->vc_display_fg = &master_display_fg;if (vc->uni_pagedict_loc)con_free_unimap(vc);vc->uni_pagedict_loc = &vc->uni_pagedict;vc->uni_pagedict = NULL;vc->vc_hi_font_mask = 0;vc->vc_complement_mask = 0;vc->vc_can_do_color = 0;/** #define DEFAULT_BELL_PITCH 750* #define DEFAULT_BELL_DURATION (HZ/8)* #define DEFAULT_CURSOR_BLINK_MS 200*/vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS;vc->vc_sw->con_init(vc, init); // dummycon_init函数if (!vc->vc_complement_mask)vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800;vc->vc_s_complement_mask = vc->vc_complement_mask;vc->vc_size_row = vc->vc_cols << 1;vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row; }

  vc_init 虚拟控制台屏幕的模式、范围、颜色等设置

static void vc_init(struct vc_data *vc, unsigned int rows,unsigned int cols, int do_clear) {int j, k ;vc->vc_cols = cols; vc->vc_rows = rows;vc->vc_size_row = cols << 1;vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;set_origin(vc);vc->vc_pos = vc->vc_origin;reset_vc(vc);for (j=k=0; j<16; j++) {vc->vc_palette[k++] = default_red[j] ;vc->vc_palette[k++] = default_grn[j] ;vc->vc_palette[k++] = default_blu[j] ;}vc->vc_def_color = default_color;vc->vc_ulcolor = default_underline_color;vc->vc_itcolor = default_italic_color;vc->vc_halfcolor = 0x08; /* grey */init_waitqueue_head(&vc->paste_wait);reset_terminal(vc, do_clear); }

总结

以上是生活随笔为你收集整理的linux终端设备：tty子系统相关的初始化的全部内容，希望文章能够帮你解决所遇到的问题。

如果觉得生活随笔网站内容还不错，欢迎将生活随笔推荐给好友。