linux有读EC RAM的工具吗,Step to UEFI (179）Shell下 EC Ram 读取工具

最近工作需要在 UEFI  Shell 下Check EC Ram 的设定，发现手上只有 Windows 下的读取工具(RW Everything)。于是研究了一下如何在Shell 读取 EC Ram。

根据【参考1】读取的流程如下：

Port 66 Commands

There are also some EC commands that use ports 0x66 and

0x62. Some of these are standard ACPI commands as defined in the external ACPI

spec, others are custom.

The port 66 protocol is essentially the standard ACPI EC

interface protocol.

1. Wait for port66.IBF = 0

2. Write command byte to port 66.

3. For each outgoing data or address byte:

3a. Wait for port66.IBF = 0

3b. Write data or address byte to port 62.

4. For each incoming data byte:

4a. Wait for port66.OBF = 1

4b. Read data byte from port 62.

5. If the command requires no data or address bytes, you can

determine when the command was accepted/executed by waiting for port66.IBF=0.

同时 ACPI 定义的通用 Command如下：

ACPI-defined port 66 commands

0x80 Read EC (write 0x80 to port 66, write address byte to

port 62, read data byte from port 62)

0x81 Write EC (write 0x81 to port 66, write address byte to

port 62, write data byte to port 62)

0x82 Burst Enable (write 0x82 to port 66, read data byte

from port 62 - the data byte is "burst ACK", value 0x90)

0x83 Burst Disable (write 0x83 to port 66, wait for

port66.IBF=0)

0x84 Query EC (i.e. read SCI event queue) (write 0x84 to

port 66, read data byte from port 62). When the data byte is 0, it means that

the SCI event queue is empty.

最终根据上述资料，编写一个 Application 如下：

#include

#include

#include

#include

extern EFI_SYSTEM_TABLE *gST;

extern EFI_BOOT_SERVICES *gBS;

#define TIMEOUT 0xFFFF

#define ECCOMMAND 0x66

#define ECSTATUS 0x66

#define ECDATA 0x62

#define EC_S_OBF BIT0

#define EC_S_IBF BIT1

#define ECREADCMD 0x80

UINT8 MemBuffer[16][16];

void WaitIBF() {

UINT32 Status;

UINTN Count;

Count = 0;

Status = 0;

Status = IoRead8 (ECSTATUS);

while (((Status & EC_S_IBF) != 0)||(Count>TIMEOUT)) {

Status = IoRead8 (ECSTATUS);

Count++;

}

}

void WaitOBF() {

UINT32 Status;

UINTN Count;

Count = 0;

Status = 0;

Status = IoRead8 (ECSTATUS);

while (((Status & EC_S_OBF) == 0)||(Count>TIMEOUT)) {

Status = IoRead8 (ECSTATUS);

Count++;

}

}

UINT8 ReadECRam(UINT8 Index) {

WaitIBF(); //1

IoWrite8(ECCOMMAND,0x80);//2

WaitIBF(); //3a

IoWrite8(ECDATA, Index); //3b

WaitOBF(); //4a

return IoRead8(ECDATA); //4b

}

void GetData()

{

UINT8 i,j;

for (i=0;i<16;i++)

for (j=0;j<16;j++) {

MemBuffer[i][j]=ReadECRam(i*16+j);

}

}

void ShowData()

{

UINT8 i,j;

Print(L" ");

for (i=0;i<16;i++) Print(L"%02X ",i);

Print(L"\n");

for (i=0;i<16;i++) {

Print(L"%02X: ",i);

for (j=0;j<16;j++) {

Print(L"%02X ",MemBuffer[i][j]);

}

Print(L"\n");

}

Print(L"\n");

}

/***

Print a welcoming message.

Establishes the main structure of the application.

@retval 0 The application exited normally.

@retval Other An error occurred.

***/

INTN

EFIAPI

ShellAppMain (

IN UINTN Argc,

IN CHAR16 **Argv

)

{

EFI_INPUT_KEY Key;

Key.ScanCode=SCAN_NULL;

while (SCAN_UP!=Key.ScanCode)

{

gST->ConOut->ClearScreen(gST->ConOut);

GetData();

ShowData();

gST -> ConIn -> ReadKeyStroke(gST->ConIn,&Key);

Print(L"Press Arrow-Up to exit\n");

gBS->Stall(1000000UL);

}

return(0);

}

在实体机上运行结果如下(按向上键退出)：

源代码和Application(X64)下载：

参考：

1. http://wiki.laptop.org/go/Ec_specification

总结

以上是生活随笔为你收集整理的linux有读EC RAM的工具吗,Step to UEFI (179）Shell下 EC Ram 读取工具的全部内容，希望文章能够帮你解决所遇到的问题。

如果觉得生活随笔网站内容还不错，欢迎将生活随笔推荐给好友。