win7 ghost 安装串口驱动inf文件出现问题

这是复制的别人的，讲的和经典，一开始试了很多方法都不行，试了这个后安装成功了，但是一开始说这个驱动不适合当前设备，我就猜想是C:\windows\System32\DriverStore\FileRepository\中的文件不对，所以找了个安装驱动成功的，把安装成功电脑上那个文件夹中的三个文件拷贝到缺失的地方，竟然成功了。三个文件分别是“mdmcpq.inf”，“mdmcpq.PNF”，“usbser.sys”。

许久没有写文章了，今天写一篇吧，顺便记录一下get新技能。

昨天要使用Mobile Device Power Monitor来测试个东西，结果连到电脑上，安装了软件。在安装驱动的时候，出现找不到指定文件：


各种折腾了半天，还是没搞定。在同事的电脑上可以识别，于是去同事那拷了usbser.sys到c:\windows\system32\drivers依然还是不行（我电脑上怎么没有这个文件？被卸载的时候删了？）为了找这个（系统找不到指定的文件），到底是哪个文件不行啊！

今天又去控制面板-》管理工具-》事件查看器-》系统日志里翻了一下，只有这个：



但是还是不知道0x2到底是啥意思啊！mchpcdc.inf也看了，没啥问题，里面就是要一个usbser.sys，再就是mchpcdc.cat。

又去c:\windows\inf下翻，把文件按日期重新排序了一下，把最新的.inf，.pnf都干掉。重新安装驱动还是不行。这时注意到了两个文件
setupapi.dev.log和setupapi.app.log，打开setupapi.dev.log，研究了一下，发现了！
>>>  [Device Install (DiShowUpdateDevice) - USB\VID_04D8&PID_FE23\5&2ADC6C57&0&4] >>>  Section start 2015/08/28 10:03:33.826 cmd: "C:\windows\system32\mmc.exe" "C:\windows\system32\devmgmt.msc" dvi: {DIF_UPDATEDRIVER_UI} 10:03:33.826 dvi:      No class installer for 'Mobile Device Power Monitor' dvi:      No CoInstallers found dvi:      Default installer: Enter 10:03:33.827 dvi:      Default installer: Exit dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 10:03:33.827 ndv: {Update Driver Software Wizard for USB\VID_04D8&PID_FE23\5&2ADC6C57&0&4} dvi:      Set selected driver complete. dvi:      {DIF_SELECTDEVICE} 10:03:40.860 dvi:           Using exported function 'PortsClassInstaller' in module 'C:\windows\system32\MsPorts.Dll'. dvi:           Class installer == MsPorts.Dll,PortsClassInstaller dvi:           No CoInstallers found dvi:           Class installer: Enter 10:03:40.862 dvi:           Class installer: Exit dvi:      {DIF_SELECTDEVICE - exit(0xe000020e)} 10:03:40.863 inf:      {SetupCopyOEMInf: C:\windows\INF\oem16.inf} 10:03:59.517 inf:           Driver Store location: C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf inf:           Published Inf Path: C:\windows\INF\oem16.inf inf:           Opened PNF: 'C:\windows\INF\oem16.inf' ([strings]) inf:           Installing catalog mchpcdc.cat as: oem16.CAT !    inf:           Failed to install catalog - error ignored !    inf:           Error 2: The system cannot find the file specified. 这个错误估计可以忽略 inf:           OEM source media location: C:\windows\INF\ inf:      {SetupCopyOEMInf exit (0x00000000)} 10:03:59.523 dvi:      Searching for hardware ID(s): dvi:           usb\vid_04d8&pid_fe23&rev_0000 dvi:           usb\vid_04d8&pid_fe23 dvi:      Searching for compatible ID(s): dvi:           usb\class_02&subclass_02&prot_01 dvi:           usb\class_02&subclass_02 dvi:           usb\class_02 inf:      Opened PNF: 'C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf' ([strings]) sig:      {_VERIFY_FILE_SIGNATURE} 10:03:59.526 sig:           Key      = mchpcdc.inf sig:           FilePath = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf sig:           Catalog  = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.cat !    sig:           Verifying file against specific (valid) catalog failed! (0x800b0109)  !    sig:           Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. 这个错误估计可以忽略 sig:      {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 10:03:59.532 sig:      {_VERIFY_FILE_SIGNATURE} 10:03:59.532 sig:           Key      = mchpcdc.inf sig:           FilePath = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf sig:           Catalog  = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.cat      sig:           Success: File is signed in Authenticode(tm) catalog.      sig:           Error 0xe0000241: The INF was signed with an Authenticode(tm) catalog from a trusted publisher. 这个错误估计可以忽略 sig:      {_VERIFY_FILE_SIGNATURE exit(0xe0000241)} 10:03:59.550 dvi:      Selected driver installs from section [DriverInstall] in 'c:\windows\system32\driverstore\filerepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf'. dvi:      Class GUID of device changed to: {4d36e978-e325-11ce-bfc1-08002be10318}. dvi:      {DIF_DESTROYPRIVATEDATA} 10:03:59.551 dvi:           Class installer: Enter 10:03:59.551 dvi:           Class installer: Exit dvi:           Default installer: Enter 10:03:59.552 dvi:           Default installer: Exit dvi:      {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 10:03:59.553 dvi:      Set selected driver complete. dvi:      {Plug and Play Service: Device Install for USB\VID_04D8&PID_FE23\5&2ADC6C57&0&4} ump:           Creating Install Process: DrvInst.exe 10:03:59.569 ndv:           Infpath=C:\windows\INF\oem16.inf ndv:           DriverNodeName=mchpcdc.inf:DeviceList.NTamd64:DriverInstall:16.20.34.438:usb\vid_04d8&pid_fe23 ndv:           DriverStorepath=C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf ndv:           Building driver list from driver node strong name... dvi:           Searching for hardware ID(s): dvi:                usb\vid_04d8&pid_fe23&rev_0000 dvi:                usb\vid_04d8&pid_fe23 dvi:           Searching for compatible ID(s): dvi:                usb\class_02&subclass_02&prot_01 dvi:                usb\class_02&subclass_02 dvi:                usb\class_02 inf:           Opened PNF: 'C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf' ([strings]) sig:           {_VERIFY_FILE_SIGNATURE} 10:03:59.591 sig:                Key      = mchpcdc.inf sig:                FilePath = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf sig:                Catalog  = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.cat !    sig:                Verifying file against specific (valid) catalog failed! (0x800b0109) !    sig:                Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. 这个错误估计可以忽略 sig:           {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 10:03:59.622 sig:           {_VERIFY_FILE_SIGNATURE} 10:03:59.622 sig:                Key      = mchpcdc.inf sig:                FilePath = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf sig:                Catalog  = C:\windows\System32\DriverStore\FileRepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.cat      sig:                Success: File is signed in Authenticode(tm) catalog.      sig:                Error 0xe0000241: The INF was signed with an Authenticode(tm) catalog from a trusted publisher.这个错误估计可以忽略 sig:           {_VERIFY_FILE_SIGNATURE exit(0xe0000241)} 10:03:59.644 dvi:           Selected driver installs from section [DriverInstall] in 'c:\windows\system32\driverstore\filerepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf'. dvi:           Class GUID of device changed to: {4d36e978-e325-11ce-bfc1-08002be10318}. dvi:           Set selected driver complete. ndv:           {Core Device Install} 10:03:59.647 inf:                Opened PNF: 'C:\windows\INF\oem16.inf' ([strings]) dvi:                {DIF_ALLOW_INSTALL} 10:03:59.653 dvi:                     Using exported function 'PortsClassInstaller' in module 'C:\windows\system32\MsPorts.Dll'. dvi:                     Class installer == MsPorts.Dll,PortsClassInstaller dvi:                     No CoInstallers found dvi:                     Class installer: Enter 10:03:59.656 dvi:                     Class installer: Exit dvi:                     Default installer: Enter 10:03:59.656 dvi:                     Default installer: Exit dvi:                {DIF_ALLOW_INSTALL - exit(0xe000020e)} 10:03:59.657 ndv:                Installing files... dvi:                {DIF_INSTALLDEVICEFILES} 10:03:59.658 dvi:                     Class installer: Enter 10:03:59.658 dvi:                     Class installer: Exit dvi:                     Default installer: Enter 10:03:59.659 dvi:                          {Install FILES} inf:                               Opened PNF: 'c:\windows\system32\driverstore\filerepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf' ([strings]) inf:                               Opened PNF: 'C:\windows\INF\mdmcpq.inf' ([strings]) inf:                               {Install Inf Section [DriverInstall.NTAMD64]} inf:                                    CopyFiles=DriverCopyFiles.NTamd64  (mchpcdc.inf line 55) cpy:                                    Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault flq:                                    QueueSingleCopy... flq:                                    Inf     : 'c:\windows\system32\driverstore\filerepository\mchpcdc.inf_amd64_neutral_2ade53c15173575e\mchpcdc.inf' flq:                                    SourceInf: 'C:\windows\INF\mdmcpq.inf' flq:                                    SourceSection: [sourcedisksfiles] flq:                                    Source root path based on SourceInf flq:                                    SourceRootPath: 'C:\windows\System32\DriverStore\FileRepository\mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8' flq:                                    {FILE_QUEUE_COPY} flq:                                         CopyStyle      - 0x00002000 flq:                                         {FILE_QUEUE_COPY} flq:                                              CopyStyle      - 0x00002000 flq:                                              SourceRootPath - 'C:\windows\System32\DriverStore\FileRepository\mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8' flq:                                              SourceFilename - 'usbser.sys' flq:                                              TargetDirectory- 'C:\windows\system32\DRIVERS' flq:                                              TargetFilename - 'usbser.sys' flq:                                              SourceDesc     - 'windows cd' flq:                                         {FILE_QUEUE_COPY exit(0x00000000)} flq:                                    {FILE_QUEUE_COPY exit(0x00000000)} inf:                               {Install Inf Section [DriverInstall.NTAMD64] exit (0x00000000)} dvi:                               Processing co-installer registration section [DriverInstall.NTAMD64.CoInstallers]. inf:                               {Install Inf Section [DriverInstall.NTAMD64.CoInstallers]} inf:                               {Install Inf Section [DriverInstall.NTAMD64.CoInstallers] exit (0x00000000)} dvi:                               Co-installers registered. dvi:                               {Install INTERFACES} dvi:                                    Installing section [DriverInstall.NTAMD64.Interfaces] dvi:                               {Install INTERFACES exit 00000000} dvi:                          {Install FILES exit (0x00000000)} dvi:                     Default installer: Exit dvi:                {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 10:03:59.672 ndv:                Pruning file queue... dvi:                {_SCAN_FILE_QUEUE} flq:                     ScanQ flags=620 flq:                          SPQ_SCAN_PRUNE_COPY_QUEUE flq:                          SPQ_SCAN_FILE_COMPARISON flq:                          SPQ_SCAN_ACTIVATE_DRP flq:                     ScanQ number of copy nodes=1 flq:                     ScanQ action=200 DoPruning=32 flq:                     ScanQ end Validity flags=620 CopyNodes=1 dvi:                {_SCAN_FILE_QUEUE exit(0, 0x00000000)} ndv:                Committing file queue... flq:                {_commit_file_queue} flq:                     CommitQ DelNodes=0 RenNodes=0 CopyNodes=1 flq:                     {SPFILENOTIFY_STARTQUEUE} flq:                     {SPFILENOTIFY_STARTQUEUE - exit(0x00000001)} flq:                     {_commit_copy_subqueue} flq:                          subqueue count=1 flq:                          {SPFILENOTIFY_STARTSUBQUEUE} flq:                          {SPFILENOTIFY_STARTSUBQUEUE - exit(0x00000001)} flq:                          source media:      flq:                               Description  - [windows cd]      flq:                               SourcePath   -[C:\windows\System32\DriverStore\FileRepository\mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8]      flq:                               SourceFile   - [usbser.sys]      flq:                               Flags        - 0x00000000      flq:                          {SPFQNOTIFY_NEEDMEDIA}      flq:                               {SPFILENOTIFY_NEEDMEDIA}      flq:                               {SPFILENOTIFY_NEEDMEDIA - exit(0x00000000)}      flq:                          {SPFQNOTIFY_NEEDMEDIA - returned 0x00000000} !!!  flq:                          source media: SPFQOPERATION_ABORT. !!!  flq:                          Error 2: The system cannot find the file specified.  问题来了！这个就是那个找不到的文件 flq:                     {_commit_copy_subqueue exit(0x00000002)} !!!  flq:                     FileQueueCommit aborting! !!!  flq:                     Error 2: The system cannot find the file specified. flq:                     {SPFILENOTIFY_ENDQUEUE} flq:                     {SPFILENOTIFY_ENDQUEUE - exit(0x00000001)} flq:                {_commit_file_queue exit(0x00000002)} ndv:                Device install status=0x00000002 ndv:                Performing device install final cleanup... !    ndv:                Queueing up error report since device installation failed... ndv:           {Core Device Install - exit(0x00000002)} 10:03:59.684 dvi:           {DIF_DESTROYPRIVATEDATA} 10:03:59.684 dvi:                Class installer: Enter 10:03:59.684 dvi:                Class installer: Exit dvi:                Default installer: Enter 10:03:59.685 dvi:                Default installer: Exit dvi:           {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 10:03:59.685 ump:           Server install process exited with code 0x00000002 10:03:59.691 ump:      {Plug and Play Service: Device Install exit(00000002)} ndv:      Device Install failed for new device...installing NULL driver. dvi:      {Plug and Play Service: Device Install for USB\VID_04D8&PID_FE23\5&2ADC6C57&0&4} ump:           Creating Install Process: DrvInst.exe 10:03:59.713 !    ndv:           Installing NULL driver! dvi:           Set selected driver complete. dvi:           {DIF_ALLOW_INSTALL} 10:03:59.730 dvi:                No class installer for 'Mobile Device Power Monitor' dvi:                No CoInstallers found dvi:                Default installer: Enter 10:03:59.731 dvi:                Default installer: Exit dvi:           {DIF_ALLOW_INSTALL - exit(0xe000020e)} 10:03:59.731 dvi:           {DIF_INSTALLDEVICE} 10:03:59.731 dvi:                No class installer for 'Mobile Device Power Monitor' dvi:                Default installer: Enter 10:03:59.732 !    dvi:                     Installing NULL driver! dvi:                     Writing common driver property settings. dvi:                     {Restarting Devices} 10:03:59.770 dvi:                          Restart: USB\VID_04D8&PID_FE23\5&2ADC6C57&0&4 dvi:                          Restart complete. dvi:                     {Restarting Devices exit} 10:03:59.780 dvi:                Default installer: Exit dvi:           {DIF_INSTALLDEVICE - exit(0x00000000)} 10:03:59.781 ump:           Server install process exited with code 0x00000000 10:03:59.783 ump:      {Plug and Play Service: Device Install exit(00000000)} ndv: {Update Driver Software Wizard exit(00000002)} <<<  Section end 2015/08/28 10:07:12.485 <<<  [Exit status: FAILURE(0x00000002)] 原来是要把usbser.sys放到C:\windows\System32\DriverStore\FileRepository\mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8才可以！
我的电脑居然没有 C:\windows\System32\DriverStore\FileRepository\mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8这个目录，在文件夹FileRepository右键取得管理员权限，mdmcpq.inf_amd64_neutral_fbc4a14a6a13d0c8，再取得这个目录的管理员权限，放入usbser.sys，重新装一下驱动，搞定！

总结

以上是生活随笔为你收集整理的win7 ghost 安装串口驱动inf文件出现问题的全部内容，希望文章能够帮你解决所遇到的问题。

如果觉得生活随笔网站内容还不错，欢迎将生活随笔推荐给好友。