etrace 跟踪程序函数动态执行流程

https://github.com/elcritch/etrace 窗口1: 监控窗口,执行监控程序,显示监控结果[root@monitor example]# pwd /root/etrace-master/example[root@monitor example]# ll total 28 -rwxr-xr-x 1 root root 16687 Jun 9 08:49 crumble -rw-r--r-- 1 root root 1644 Aug 7 2015 crumble.c -rw-r--r-- 1 root root 242 Aug 7 2015 Makefile[root@monitor example]# ../src/etrace crumble[root@monitor example]# ll total 28 -rwxr-xr-x 1 root root 16687 Jun 9 08:49 crumble -rw-r--r-- 1 root root 1644 Aug 7 2015 crumble.c -rw-r--r-- 1 root root 242 Aug 7 2015 Makefile prw-r--r-- 1 root root 0 Jun 9 08:59 TRACE 窗口2：执行程序
[root@monitor example]# ./crumble
buy 125 grams of sugar
buy 125 grams of butter
buy 200 grams of wheat
buy 1 pinch of salt
buy 5 pieces of apple
skin apples and make little dices
mix butter with sugar, wheat and salt
put apples below
put crumble on top
put apple crumble in oven
cook apple crumble at 220 degrees for 45 minutes

窗口1：显示程序监控结果 //etrace跟据 TRACE 这个文件中的 记录的函数调用地址 查找对应 crumble中的函数符号名,并生调用图
[root@monitor example]# ../src/etrace crumble

   \--main
   |    \--Crumble_make_apple_crumble
   |    |       \--Crumble_buy_stuff
   |    |       |       \--Crumble_buy
   |    |       |       \--Crumble_buy (total: 5 times)
   |    |       \--Crumble_prepare_apples
   |    |       |       \--Crumble_skin_and_dice
   |    |       \--Crumble_mix
   |    |       \--Crumble_finalize
   |    |       |       \--Crumble_put
   |    |       |       \--Crumble_put (total: 2 times)
   |    |       \--Crumble_cook
   |    |       |       \--Crumble_put
   |    |       |       \--Crumble_bake

原理：
[root@monitor example]# cat Makefile

CC = gcc
CFLAGS = -g -finstrument-functions --std=gnu99

crumble: crumble.c ../src/ptrace.c
        $(CC) $(CFLAGS) -o crumble crumble.c ../src/ptrace.c

run:
        touch TRACE ;
        ./crumble
        ../src/etrace crumble
        rm -f TRACE

clean:
        rm -f crumble TRACE


[root@monitor example]# make //执行原理
gcc -g -finstrument-functions --std=gnu99 -o crumble crumble.c ../src/ptrace.c 单窗口也可以显示跟踪结果
[root@monitor example]# make run touch TRACE ; ./crumble buy 125 grams of sugar buy 125 grams of butter buy 200 grams of wheat buy 1 pinch of salt buy 5 pieces of apple skin apples and make little dices mix butter with sugar, wheat and salt put apples below put crumble on top put apple crumble in oven cook apple crumble at 220 degrees for 45 minutes ../src/etrace crumble\--main | \--Crumble_make_apple_crumble | | \--Crumble_buy_stuff | | | \--Crumble_buy | | | \--Crumble_buy (total: 5 times) | | \--Crumble_prepare_apples | | | \--Crumble_skin_and_dice | | \--Crumble_mix | | \--Crumble_finalize | | | \--Crumble_put | | | \--Crumble_put (total: 2 times) | | \--Crumble_cook | | | \--Crumble_put | | | \--Crumble_bake rm -f TRACE

 

执行原理： [root@monitor example]# touch TRACE [root@monitor example]# ./crumble buy 125 grams of sugar buy 125 grams of butter buy 200 grams of wheat buy 1 pinch of salt buy 5 pieces of apple skin apples and make little dices mix butter with sugar, wheat and salt put apples below put crumble on top put apple crumble in oven cook apple crumble at 220 degrees for 45 minutes
[root@monitor example]# ll total 32 -rwxr-xr-x 1 root root 16687 Jun 9 09:17 crumble -rw-r--r-- 1 root root 1650 Jun 9 09:17 crumble.c -rw-r--r-- 1 root root 244 Jun 9 09:05 Makefile -rw-r--r-- 1 root root 563 Jun 9 09:17 TRACE
[root@monitor example]# cat TRACE enter 0x400beb enter 0x400b88 enter 0x400904 enter 0x4008a4 enter 0x400ba1 enter 0x400b3e enter 0x4008ba enter 0x400864 exit 0x400864 enter 0x400864 exit 0x400864 enter 0x400864 exit 0x400864 enter 0x400864 exit 0x400864 enter 0x400864 exit 0x400864 exit 0x4008ba enter 0x40096c enter 0x400940 exit 0x400940 exit 0x40096c enter 0x4009a4 exit 0x4009a4 enter 0x400a5a enter 0x400a0f exit 0x400a0f enter 0x400a0f exit 0x400a0f exit 0x400a5a enter 0x400af9 enter 0x400a0f exit 0x400a0f enter 0x400aa4 exit 0x400aa4 exit 0x400af9 exit 0x400b3e exit 0x400ba1 EXIT 6847 0000000000400ba1 <main>:400ba1: 55 push %rbp400ba2: 48 89 e5 mov %rsp,%rbp400ba5: 53 push %rbx400ba6: 48 83 ec 18 sub $0x18,%rsp400baa: 89 7d ec mov %edi,-0x14(%rbp)400bad: 48 89 75 e0 mov %rsi,-0x20(%rbp)400bb1: 48 8b 75 08 mov 0x8(%rbp),%rsi400bb5: bf a1 0b 40 00 mov $0x400ba1,%edi 400bba: e8 8e 01 00 00 callq 400d4d <__cyg_profile_func_enter>400bbf: e8 7a ff ff ff callq 400b3e <Crumble_make_apple_crumble>400bc4: bb 00 00 00 00 mov $0x0,%ebx400bc9: 48 8b 75 08 mov 0x8(%rbp),%rsi400bcd: bf a1 0b 40 00 mov $0x400ba1,%edi400bd2: e8 99 01 00 00 callq 400d70 <__cyg_profile_func_exit>400bd7: 89 d8 mov %ebx,%eax400bd9: 48 83 c4 18 add $0x18,%rsp400bdd: 5b pop %rbx400bde: c9 leaveq 400bdf: c3 retq

 

[root@monitor src]# cat ptrace.c //程序连接时加的额外代码/*-------------------------------------------------------------------------*/ /**@file ptrace.c@author N. Devillard, V. Chudnovsky@date March 2004@version $Revision: 1.1.1.1 $@brief Add tracing capability to any program compiled with gcc.This module is only compiled when using gcc and tracing has beenactivated. It allows the compiled program to output messages whenevera function is entered or exited.To activate this feature, your version of gcc must supportthe -finstrument-functions flag.When using ptrace on a dynamic library, you must set thePTRACE_REFERENCE_FUNCTION macro to be the name of a function in thelibrary. The address of this function when loaded will be the firstline output to the trace file and will permit the translation of theother entry and exit pointers to their symbolic names. You may setthe macro PTRACE_INCLUDE with any #include directives needed forthat function to be accesible to this source file.The printed messages yield function addresses, not human-readablenames. To link both, you need to get a list of symbols from theprogram. There are many (unportable) ways of doing that, see the'etrace' project on freshmeat for more information about how to digthe information. */ /*--------------------------------------------------------------------------*//*$Id: ptrace.c,v 1.1.1.1 2004-03-16 20:00:07 ndevilla Exp $$Author: ndevilla $$Date: 2004-03-16 20:00:07 $$Revision: 1.1.1.1 $ */#if (__GNUC__>2) || ((__GNUC__ == 2) && (__GNUC_MINOR__ > 95))/*---------------------------------------------------------------------------Includes---------------------------------------------------------------------------*/#include <stdio.h> #include <stdlib.h> #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #include <string.h> #include <sys/errno.h>/*---------------------------------------------------------------------------User Macros---------------------------------------------------------------------------*/ #define PTRACE_PIPENAME "TRACE"/* When using ptrace on a dynamic library, the following must be defined:#include "any files needed for PTRACE_REFERENCE_FUNCTION" #define PTRACE_REFERENCE_FUNCTION functionName`*//*---------------------------------------------------------------------------Defines---------------------------------------------------------------------------*/#define REFERENCE_OFFSET "REFERENCE:" #define FUNCTION_ENTRY "enter" #define FUNCTION_EXIT "exit" #define END_TRACE "EXIT" #define __NON_INSTRUMENT_FUNCTION__ __attribute__((__no_instrument_function__)) #define PTRACE_OFF __NON_INSTRUMENT_FUNCTION__ #define STR(_x) #_x #define DEF(_x) _x #define GET(_x,_y) _x(_y) #define TRACE __GNU_PTRACE_FILE__ /*---------------------------------------------------------------------------Function codes---------------------------------------------------------------------------*//** Initial trace open */ static FILE *__GNU_PTRACE_FILE__;/** Final trace close */ static void __NON_INSTRUMENT_FUNCTION__ gnu_ptrace_close(void) {fprintf(TRACE, END_TRACE " %ld\n", (long)getpid());if (TRACE != NULL)fclose(TRACE);return ; }/** Trace initialization */ static int __NON_INSTRUMENT_FUNCTION__ gnu_ptrace_init(void) {struct stat sta;__GNU_PTRACE_FILE__ = NULL;/* See if a trace file exists */if (stat(PTRACE_PIPENAME, &sta) != 0) {/* No trace file: do not trace at all */return 0;}else {/* trace file: open up trace file */if ((TRACE = fopen(PTRACE_PIPENAME, "a")) == NULL){char *msg = strerror(errno);perror(msg);printf("[gnu_ptrace error]\n");return 0;}#ifdef PTRACE_REFERENCE_FUNCTIONfprintf(TRACE,"%s %s %p\n",REFERENCE_OFFSET,GET(STR,PTRACE_REFERENCE_FUNCTION),(void *)GET(DEF,PTRACE_REFERENCE_FUNCTION));#endif/* Tracing requested: a trace file was found */atexit(gnu_ptrace_close);return 1;} }/** Function called by every function event */ void __NON_INSTRUMENT_FUNCTION__ gnu_ptrace(char * what, void * p) {static int first=1;static int active=1;if (active == 0)return;if (first){active = gnu_ptrace_init();first = 0;if (active == 0)return;}fprintf(TRACE, "%s %p\n", what, p);fflush(TRACE);return; }/** According to gcc documentation: called upon function entry */ void __NON_INSTRUMENT_FUNCTION__ __cyg_profile_func_enter(void *this_fn, void *call_site) {gnu_ptrace(FUNCTION_ENTRY, this_fn);(void)call_site; }/** According to gcc documentation: called upon function exit */ void __NON_INSTRUMENT_FUNCTION__ __cyg_profile_func_exit(void *this_fn, void *call_site) {gnu_ptrace(FUNCTION_EXIT, this_fn);(void)call_site; }#endif /* vim: set ts=4 et sw=4 tw=75 */

 

执行原理：

test.c
#include <stdio.h>
fun()
{
printf("this is test\n");
}
main()
{

fun();

}

gcc test.c -g -otest
00000000004004d4 <main>:
  4004d4:       55                      push   %rbp
  4004d5:       48 89 e5                mov    %rsp,%rbp
  4004d8:       b8 00 00 00 00          mov    $0x0,%eax
  4004dd:       e8 e2 ff ff ff          callq  4004c4 <fun>
  4004e2:       c9                      leaveq
  4004e3:       c3                      retq   
  4004e4:       90                      nop
  4004e5:       90                      nop
  4004e6:       90                      nop
  4004e7:       90                      nop
  4004e8:       90                      nop
  4004e9:       90                      nop
  4004ea:       90                      nop
  4004eb:       90                      nop
  4004ec:       90                      nop
  4004ed:       90                      nop
  4004ee:       90                      nop
  4004ef:       90                      nop




gcc test.c -g  -finstrument-functions -otest

00000000004005a0 <main>:
  4005a0:       55                      push   %rbp
  4005a1:       48 89 e5                mov    %rsp,%rbp
  4005a4:       48 8b 75 08             mov    0x8(%rbp),%rsi
  4005a8:       bf a0 05 40 00          mov    $0x4005a0,%edi
  4005ad:       e8 be fe ff ff          callq  400470 <__cyg_profile_func_enter@plt>
  4005b2:       b8 00 00 00 00          mov    $0x0,%eax
  4005b7:       e8 b8 ff ff ff          callq  400574 <fun>
  4005bc:       48 8b 75 08             mov    0x8(%rbp),%rsi
  4005c0:       bf a0 05 40 00          mov    $0x4005a0,%edi
  4005c5:       e8 b6 fe ff ff          callq  400480 <__cyg_profile_func_exit@plt>
  4005ca:       c9                      leaveq
  4005cb:       c3                      retq   
  4005cc:       90                      nop
  4005cd:       90                      nop
  4005ce:       90                      nop
  4005cf:       90                      nop







gcc -g -finstrument-functions --std=gnu99 -otest test.c ../src/ptrace.c //ptrace.c 写函数进入或退去点到TRACE文件中(如果存在的话)//函数的首地址

0000000000400840 <main>:
  400840:       55                      push   %rbp
  400841:       48 89 e5                mov    %rsp,%rbp
  400844:       53                      push   %rbx
  400845:       48 83 ec 08             sub    $0x8,%rsp
  400849:       48 8b 75 08             mov    0x8(%rbp),%rsi
  40084d:       bf 40 08 40 00          mov    $0x400840,%edi
  400852:       e8 96 01 00 00          callq  4009ed <__cyg_profile_func_enter>
  400857:       b8 00 00 00 00          mov    $0x0,%eax
  40085c:       e8 b3 ff ff ff          callq  400814 <fun>
  400861:       bb 00 00 00 00          mov    $0x0,%ebx
  400866:       48 8b 75 08             mov    0x8(%rbp),%rsi
  40086a:       bf 40 08 40 00          mov    $0x400840,%edi
  40086f:       e8 9c 01 00 00          callq  400a10 <__cyg_profile_func_exit>
  400874:       89 d8                   mov    %ebx,%eax
  400876:       48 83 c4 08             add    $0x8,%rsp
  40087a:       5b                      pop    %rbx
  40087b:       c9                      leaveq
  40087c:       c3                      retq   
  40087d:       90                      nop
  40087e:       90                      nop
  40087f:       90                      nop



00000000004009ed <__cyg_profile_func_enter>:
  4009ed:       55                      push   %rbp
  4009ee:       48 89 e5                mov    %rsp,%rbp
  4009f1:       48 83 ec 10             sub    $0x10,%rsp
  4009f5:       48 89 7d f8             mov    %rdi,-0x8(%rbp)
  4009f9:       48 89 75 f0             mov    %rsi,-0x10(%rbp)
  4009fd:       48 8b 45 f8             mov    -0x8(%rbp),%rax
  400a01:       48 89 c6                mov    %rax,%rsi
  400a04:       bf a1 0b 40 00          mov    $0x400ba1,%edi
  400a09:       e8 5a ff ff ff          callq  400968 <gnu_ptrace>
  400a0e:       c9                      leaveq
  400a0f:       c3                      retq  

0000000000400968 <gnu_ptrace>:
  400968:       55                      push   %rbp
  400969:       48 89 e5                mov    %rsp,%rbp
  40096c:       53                      push   %rbx
  40096d:       48 83 ec 18             sub    $0x18,%rsp
  400971:       48 89 7d e8             mov    %rdi,-0x18(%rbp)
  400975:       48 89 75 e0             mov    %rsi,-0x20(%rbp)
  400979:       8b 05 4d 06 20 00       mov    0x20064d(%rip),%eax        # 600fcc <active.3459>
  40097f:       85 c0                   test   %eax,%eax
  400981:       74 5f                   je     4009e2 <gnu_ptrace+0x7a>
  400983:       8b 05 47 06 20 00       mov    0x200647(%rip),%eax        # 600fd0 <first.3458>
  400989:       85 c0                   test   %eax,%eax
  40098b:       74 1f                   je     4009ac <gnu_ptrace+0x44>
  40098d:       e8 36 ff ff ff          callq  4008c8 <gnu_ptrace_init>
  400992:       89 05 34 06 20 00       mov    %eax,0x200634(%rip)        # 600fcc <active.3459>
  400998:       c7 05 2e 06 20 00 00    movl   $0x0,0x20062e(%rip)        # 600fd0 <first.3458>
  40099f:       00 00 00
  4009a2:       8b 05 24 06 20 00       mov    0x200624(%rip),%eax        # 600fcc <active.3459>
  4009a8:       85 c0                   test   %eax,%eax
  4009aa:       74 39                   je     4009e5 <gnu_ptrace+0x7d>
  4009ac:       bb 9a 0b 40 00          mov    $0x400b9a,%ebx
  4009b1:       48 8b 05 30 06 20 00    mov    0x200630(%rip),%rax        # 600fe8 <__GNU_PTRACE_FILE__>
  4009b8:       48 8b 4d e0             mov    -0x20(%rbp),%rcx
  4009bc:       48 8b 55 e8             mov    -0x18(%rbp),%rdx
  4009c0:       48 89 de                mov    %rbx,%rsi
  4009c3:       48 89 c7                mov    %rax,%rdi
  4009c6:       b8 00 00 00 00          mov    $0x0,%eax
  4009cb:       e8 40 fd ff ff          callq  400710 <fprintf@plt>
  4009d0:       48 8b 05 11 06 20 00    mov    0x200611(%rip),%rax        # 600fe8 <__GNU_PTRACE_FILE__>
  4009d7:       48 89 c7                mov    %rax,%rdi
  4009da:       e8 41 fd ff ff          callq  400720 <fflush@plt>
  4009df:       90                      nop
  4009e0:       eb 04                   jmp    4009e6 <gnu_ptrace+0x7e>
  4009e2:       90                      nop
  4009e3:       eb 01                   jmp    4009e6 <gnu_ptrace+0x7e>
  4009e5:       90                      nop
  4009e6:       48 83 c4 18             add    $0x18,%rsp
  4009ea:       5b                      pop    %rbx
  4009eb:       c9                      leaveq
  4009ec:       c3                      retq  

[root@monitor example]# touch TRACE
[root@monitor example]# ./test
this is test
[root@monitor example]# ll
total 52
-rwxr-xr-x 1 root root 16687 Jun  9 09:39 crumble
-rw-r--r-- 1 root root  1651 Jun  9 09:28 crumble.c
-rw-r--r-- 1 root root   244 Jun  9 09:05 Makefile
-rwxr-xr-x 1 root root 13627 Jun  9 09:47 test
-rw-r--r-- 1 root root    75 Jun  9 09:34 test.c
-rw-r--r-- 1 root root    68 Jun  9 09:52 TRACE
[root@monitor example]# cat TRACE
enter 0x400840 // main进入
enter 0x400814 // fun进入
exit 0x400814 // fun退去
exit 0x400840 // main退去
EXIT 6993

转载于:https://www.cnblogs.com/zengkefu/p/5571961.html

总结

以上是生活随笔为你收集整理的etrace 跟踪程序函数动态执行流程的全部内容，希望文章能够帮你解决所遇到的问题。

如果觉得生活随笔网站内容还不错，欢迎将生活随笔推荐给好友。